SP10F2 Power Divider Surface Mount Flatpack 2 way 5-500 Mhz

The SP10F2 is a lumped element surface mount flatpack 2 way power divider-splitter that covers the frequency range of 5-500 Mhz. A power divider-combiner will divide a signal or combine two signals with a nominal-theoretical loss of 3.0 dB and isolation provided between output ports. The RF power divider can also be used as power combiner under certain conditions. This RF surface mount power divider-splitter has a 50 Ohm nominal impedance and a maximum input power of 1 Watt as power divider. This surface mount power divider-combiner is optimized for wide bandwidth with high isolation, low insertion loss, good VSWR match and excellent phase and amplitude balance. The surface mount can be installed using reflow or wave soldering methods.

Data Sheet: View PDF file for Dimensions and Specifications.