SP12C3 Power Divider 3 way 5-1500 Mhz


The SP12C3 is a wide band lumped elements 3 way SMA power divider-splitter that covers the frequency range of 5-1500 Mhz. This power divider-combiner will divide a signal or combine the input signals with a nominal-theoretical loss of 4.77 dB and isolation provided between output ports. The RF power divider can also be used as a coaxial power combiner under certain conditions. This RF coaxial power divider-splitter has a 50 Ohm nominal impedance and a maximum input power of 1.0 Watts as a divider with termination loads of 1.20:1 VSWR or better. The connectors for this RF power divider-splitter is SMA female at the input port and SMA female at the output ports.
The designs of these lumped elements power divider-combiners utilize bifilar twisted wires with ferrite cores and are optimized for wide bandwidth with high isolation, low insertion loss, good VSWR match and excellent phase and amplitude balance.

Add to Cart:

  • Model: SP12C3
  • 8 Units in Stock

Qty Discounts Off Price