SP11C6 Power Divider 6 way 5-1000 Mhz

The SP11C6 is a wide band lumped elements 6 way SMA power divider-splitter that covers the frequency range of 5-1000 Mhz. This power divider-combiner will divide a signal or combine the input signals with a nominal-theoretical loss of 7.78 dB and isolation provided between output ports. The RF power divider can also be used as a coaxial power combiner under certain conditions. This RF coaxial power divider-splitter has a 50 Ohm nominal impedance and a maximum input power of 1.0 Watts as a divider with termination loads of 1.20:1 VSWR or better. The connectors for this RF power divider-splitter is SMA female at the input port and SMA female at the output ports.
The designs of these lumped elements power divider-combiners utilize bifilar twisted wires with ferrite cores and are optimized for wide bandwidth with high isolation, low insertion loss, good VSWR match and excellent phase and amplitude balance.